Invited talks
- K.J. Kubiak, Wettability and Contact Angle Hysteresis modelling using LBM, Special Interest Group on Drops Dynamic 3rd April 2017, Wadham College, University of Oxford, UK.
- K.J. Kubiak, T.G. Mathia, On functional wettability of rough surfaces – from characterization to modelling, 4th International Conference on Surface Metrology, 10-13 March 2014, Hamburg, Germany.
- K.J. Kubiak , T.G. Mathia, Anisotropic wetting of hydrophobic and hydrophilic surfaces – modelling by Lattice Boltzmann Method, 1st International Conference on Mechanics, National Tsing Hua University, 8 November 2013, Hsinchu, Taiwan.
- K.J. Kubiak, Modelling of fluid surface interaction in multiphase flow by lattice Boltzmann method, Applied Math Seminar, School of Mathematics, 24 October 2012, University of Leeds, United Kingdom.
- K.J. Kubiak, M. Bigrelle, T.G. Mathia, M.C.T. Wilson, S. Carras, Surface metrology in modelling wetting dynamics of rough interfaces for bio-applications, 3rd International Conference on Surface Metrology, 21-23 March 2012, Annecy, France.
- K.J. Kubiak, M.C.T. Wilson, K. Hood, J.L. Summers, Specification and interpretation of contact angles in lattice Boltzmann simulations of wetting, Joint OCCAM/ICFD lattice Boltzmann workshop, New College,13-14 September 2010, Oxford, United Kingdom.
- K.J. Kubiak, M.C.T. Wilson, J.L. Summers, Wettability and contact angle hysteresis modelling in lattice Boltzmann method, Lattice Boltzmann Workshop, Wadham College, Oxford, 1 – 2 September 2011.
International Conferences
- K.J. Kubiak, L.
Wojciechowski, T.G. Mathia, Morphological furrows impact on tribology
of oleophilic and oleophobic behaviour of metallic surfaces, 43rd Leeds-Lyon Symposium on Tribology, 6-9 September 2016, Leeds, United Kingdom. - T. Liskiewicz, K. Kubiak, D. Jozefczyk, Surface design approach against fretting-corrosion degradation of electrical connectors, Surface Texture and Roughness in Tribology Institute of Physics, 17 June 2016, London UK.
- T. Liskiewicz, K. Kubiak, Surface modification of metallic materials induced by fretting ?nanoindentationmapping analysis, International Symposium on Fretting Fatigue (ISFF8), 18-20 April, 2016, Brasilia, Brazil.
- K.J. Kubiak, L. Wojciechowski, T.G. Mathia, Influence of surface roughness on wettability: Static contact angle, International Conference on Surface Metrology (ICSM) 05 April 2016, Poznan, Poland.
- K.J. Kubiak, Z. Khatir, P.K. Jimack, T.G. Mathia, Energy Efficiency Optimization of Superhydrophobic Surfaces for Enhanced Condensation Heat Transfer, Proceedings of SusTem 2015 International conference, 7-8 July 2015, Newcastle United Kingdom.
- R. Wlodarski, S. Valette, K.J. Kubiak, T. G. Mathia, Morphological Anisotropy of Surfaces, XI International Scientific Conference on Coordinate Measuring Techniques, Bielsko-Biala, Poland, 2-4 April 2014.
- G. Fischer, K.J. Kubiak, M. Bigerelle, T.G. Mathia, Z. Khatir, Wetting on anisotropic sinusoidal surfaces, XI International Scientific Conference on Coordinate Measuring Techniques, Bielsko-Biala, Poland, 2-4 April 2014.
- K.J. Kubiak, T.G. Mathia, Z. Khatir, Hydrophilic to hydrophobic wetting transition on anisotropic surfaces applied to condensation process modelling, 4th International Conference on Surface Metrology, 10-13 March 2014, Hamburg, Germany.
- K.J. Kubiak, M. Bigerelle, T.G. Mathia, Z. Khatir, G. Fischer, Anisotropic wetting on sinusoidal surfaces, 4th International Conference on Surface Metrology, 10-13 March 2014, Hamburg, Germany.
- Z. Khatir, K.J. Kubiak, CFD based optimisation of the superhydrophobic functional surface in dropwise condensation, International Conference on the Analysis and Mathematical Applications in Engineering and Science, 19-22 January 2014, Miri, Malaysia.
- C. Hubert, K.J. Kubiak, M. Bigerelle, A. Dubois, L. Dubar, Identification of lubrication regime by multi-scale decomposition of peaks curvature radius, 40th Leeds-Lyon Symposium on Tribology, 4-6 September 2013, Lyon, France.
- K.J. Kubiak, W. Pawlak, B.G. Wendler, T.G. Mathia, Wear resistant multilayer nanocomposite WC1-x/C coating on Ti-6Al-4V titanium alloy, 40th Leeds-Lyon Symposium on Tribology, 4-6 September 2013, Lyon, France.
- M. Bigerelle, J.M. Nianga, D. Najjar and A. Iost, C. Hubert, K.J. Kubiak, Roughness signature of tribological contact calculated by new Curvature Radius Estimation method on fractal surface, 39th Leeds-Lyon Symposium on Tribology, 4-7 September 2012, Leeds, United Kingdom.
- K.J. Kubiak, M.C.T. Wilson, J.R. Castrejón-Pita, I.M. Hutchings, Modelling of Contact Angle Hysteresis on rough, non-uniform and superhydrophobic surfaces with lattice Boltzmann method, 64th Annual Meeting of the APS (American Physical Society) Division of Fluid Dynamics, Volume 56, Number 18, 20-22 November 2011, Baltimore, Maryland, USA.
- K.J. Kubiak, M.C.T. Wilson, J.L. Summers, K. Hood, Modelling of contact angle hysteresis in the lattice Boltzmann method, 8th International Conference for Mesoscopic Methods in Engineering and Science ICMMES, 4-8 July 2011, Lyon, France.
- K.J. Kubiak, M. Bigerelle, T.G. Mathia, W. d’Hardivilliers, Roughness of interface in dry contact under fretting conditions, 13th International Conference on Metrology and Properties of Engineering Surfaces, 12-14 April 2011, London, United Kingdom.
- K.J. Kubiak, T.G. Mathia, Methodology for safety design in fretted joints manufacturing subjected to vibration, 3rd International Conference – MANUFACTURING 2010, Contemporary problems of manufacturing and production management, 24-26 November 2010, Poznan, Poland.
- K.J. Kubiak, M.C.T. Wilson, J.L. Summers, N. Kapur, K. Hood, Modelling of droplet coalescence on non-uniform surfaces with the lattice Boltzmann method, 63rd Annual Meeting of the American Physical Society, Division of Fluid Dynamics (DFD), Bulletin APS Series II, Vol. 55, No. 16, ISSN: 0003-0503, 21-23 November, Long Beach USA.
- K.J. Kubiak, M.C.T. Wilson, T.G. Mathia, S. Carras, On the dynamics of contact line motion during the wetting of rough surfaces and correlation with topographical surface parameters, Proceedings of 2nd International Conference on Surface Metrology, October 2010, Worcester, p. 90-101, ISBN978-1-4507-4290-0.
- T.G. Mathia, M. Bigerelle, M. Wieczorowski, K.J. Kubiak, Ph.Carval, S. Carras, Surface Morphology in Counterfeiting, Proceedings of 2nd International Conference on Surface Metrology, October 2010, Worcester, p.166-168, ISBN978-1-4507-4290-0.
- M.C.T Wilson, K.J. Kubiak, K. Hood, J.L. Summers, Challenges and potential for predictive modelling of wetting, Institute of Mathematics and its Applications (IMA) International Conference on Fluid Problems in Process Engineering, 6-8 September 2010, Leeds, United Kingdom.
- K.J. Kubiak, T.G. Mathia, S. Carras, Morphological criteria for micro tolerancing in manufacturing processes of assembly joints under fretting conditions, International Symposium on Measurement and Quality Control 2010 ISMQC, 5-9 September 2010, Osaka, Japan.
- K.J. Kubiak, M.C.T. Wilson, J.L. Summers, N. Kapur, K. Hood, Modelling of droplet coalescence on non-uniform surfaces with the lattice Boltzmann method, Institute of Mathematics and its Applications (IMA) International Conference on Fluid Problems in Process Engineering, 6-8 September 2010, Leeds, United Kingdom.
- K.J. Kubiak, T.G. Mathia, The role of machining and topography cycling micro-sliding under non-lubricated and boundary lubricated regime, Tribochemistry Kyoto 2009, 2-4 September 2009, Japan.
- J. Meriaux, S. Fouvry, K.J. Kubiak, J-A. Ruiz-Sabariego, B. Bonnet, Quantitative and Qualitative Study on the Cracking in Ti-6Al-4V Material under Fretting-Fatigue Solicitations, 12th International Conference on Fracture, July 2009, Ottawa, Canada.
- K.J. Kubiak, M.C.T. Wilson, T.G. Mathia, Ph. Carval, Wettability versus roughness of engineering surfaces, 12th International Conference on Metrology & Properties of Engineering Surfaces, 8-10 July 2009, Rzeszow, Poland.
- A. Kubiak, T.G. Mathia, K.J. Kubiak, S. Bouvier, Multi-site & Multi-sensing industrial process monitoring devoted to valorization strategy for various origins used oils, Proceedings of What, Where, When: Multi-dimensional Advances for Industrial Process Monitoring International Symposium, Leeds, 23th-24th June 2009.
- T.G. Mathia, K. Kubiak, V. Génissieux, Multi-sensing strategy to enhance process in terms of reliability and performances – case of tribological focus on new compressors generation, Proceedings of What, Where, When: Multi-dimensional Advances for Industrial Process Monitoring, International Symposium, Leeds, 23 – 24 June 2009.
- K.J. Kubiak, T.G. Mathia, M.C.T. Wilson, Methodology for metrology of wettability versus roughness of engineering surfaces, 14th International Congress of Metrology in Paris 22-25 June 2009, France.
- K.J. Kubiak, T.G. Mathia, B.G. Wendler, W. Pawlak, Tribological investigation of a new low wear coating system on Ti-6Al-4V, 36th International Conference On Metallurgical Coatings And Thin Films ICMCTF, April 27-May 1 2009, San Diego, USA.
- K.J. Kubiak, T.G. Mathia, Influence of roughness on contact interface in fretting under dry and boundary lubricated sliding regimes, 17th International Conference on Wear Of Materials, 19-23 April 2009, Las Vegas USA.
- S. Fouvry, J. Meriaux, K.J. Kubiak, Développement d’une approche couplée amorçage & condition d’arret de fissuration pour décrire l’endommagement sous chargements de Fretting-Fatigue, 28emes Journées de Printemps, Mesures et suivi de l’endommagement en fatigue, 13-14 Mai 2009, Paris, France.
- K.J. Kubiak, T.G. Mathia, S Fouvry, Interface roughness effect on friction map under fretting contact conditions, Tribology international, 35rd Leeds-Lyon Symposium on Tribology, 2008 Leeds, United Kingdom.
- K.J. Kubiak, T.G. Mathia, S Fouvry, Interface topography effect on engineering reliability of junctions under fretting conditions, VIII International Conference on Tribology and Reliability, Saint Petersburg September 2008, edited by prof. K.N. Voynov, ISBN 978-5-7641-0207-8.
- K. Kubiak, S Fouvry, Prediction of the Fretting Fatigue Endurance Based on a Combined Crack Nucleation and Crack Arrest Formulation: Application to AIS1 1034 Steel for a Rail Train Application, 34rd Leeds-Lyon Symposium on Tribology, Lyon 2007.
- F. Bumbieler, F. Demilly, Y. Flament, K. Kubiak, S. Fouvry, Fretting-Fatigue phenomenon on TGV axles: initiation and propagation aspects, 15th International Wheelset Congres, 23-27 September 2007, Prague, Czech Republic.
- K. Kubiak, S.Fouvry, Prediction of the maximum crack length under Plain Fretting and Fretting Fatigue conditions based on a crack arrest formulation, Fifth International Symposium On Fretting Fatigue (ISFF5), 21-23 April 2007, Montreal, Quebec, Canada.
- K. Kubiak, S. Fouvry, F. Bumbieler, Prediction of fretting wear and fretting fatigue crack initiation conditions, International Conference on Fatigue Damage of Structural Materials VI, 17-22 September 2006 Hyannis, MA, USA.
- K Kubiak, S Fouvry, Prediction of the Fretting Fatigue Endurance Based on a Combined Crack Nucleation and Crack Arrest Formulation: Application to AIS1 1034 Steel for a Rail Train Application, 33rd Leeds-Lyon Symposium on Tribology, 12-15 September 2006 Leeds, United Kingdom.
- K. Kubiak, S. Fouvry, A-M. Marechal, J-M. Vernet, Behaviour of shot peening + WC-Co HVOF sprayed coating under complex fretting wear and fretting fatigue loading conditions, International Conference on Metallurgical Coatings and Thin Films, May 1-5 May 2006, ICMCTF 2006, San Diego – California, USA.
- K. Kubiak, S. Fouvry, A.M. Marechal, A practical methodology to select fretting palliatives: application to shot peening, hard chromium and WC-Co coatings, The 15th International Conference on Wear of Materials , WOM 2005,24-28 April 2005, San Diego – California, USA.
- K. Kubiak, T. Liskiewicz, S. Fouvry, B. Wendler, Development of a coating strategy to palliate the fretting damages, 17th Physical Metallurgy and Materials Science Conference, Advanced Materials & Technologies, AMT 2004, 20-24 June 2004, Lodz, Poland.